Калькулятор матеріалів для настилу: оцініть необхідну деревину та матеріали
Розрахуйте точну кількість настилів, балок, опор, кріплень та бетону, необхідних для вашого проекту настилу, ввівши розміри.
Калькулятор настилу
Розміри настилу
Необхідні матеріали
Документація
Decking Calculator: Estimate Materials for Your Deck Project
Introduction
Planning to build a deck but unsure how much material you'll need? Our Decking Calculator is a comprehensive tool designed to help homeowners, contractors, and DIY enthusiasts accurately estimate the materials required for deck construction. By simply entering your deck's dimensions (length, width, and height), this calculator provides detailed estimates for deck boards, joists, beams, posts, fasteners, and concrete needed for your project. Proper material estimation is crucial for budgeting, reducing waste, and ensuring your deck project proceeds smoothly from start to finish.
The Decking Calculator uses industry-standard spacing and dimensions to calculate material quantities based on best practices in deck construction. Whether you're planning a simple backyard deck or a more complex outdoor living space, this tool will help you determine exactly what materials to purchase before you begin building.
How Deck Materials Are Calculated
Understanding how deck materials are calculated helps you plan your project more effectively. Our calculator uses the following formulas and standards to estimate material quantities:
Deck Boards Calculation
The number of deck boards needed depends on the deck's surface area and the width of the boards. Standard deck boards are typically 5.5 inches wide (for 6-inch nominal width boards).
Where:
- Width is converted to inches (Width in feet × 12)
- Board Width is typically 5.5 inches for standard deck boards
- Board Length is typically 16 feet (though 8, 10, 12, and 20-foot lengths are also common)
- represents rounding up to the nearest whole number
Joists Calculation
Joists are the horizontal framing members that support the deck boards. They're typically spaced 16 inches on center (O.C.) for residential decks.
Where:
- Width is converted to inches (Width in feet × 12)
- Joist Spacing is typically 16 inches
- The +1 accounts for the starting joist
Beams Calculation
Beams are the main support structures that carry the load from the joists to the posts. They're typically spaced 8 feet apart.
Where:
- Beam Spacing is typically 8 feet
- The +1 accounts for the starting beam
Posts Calculation
Posts are vertical supports that transfer the deck's weight to the ground. They're typically placed at beam intersections and spaced 8 feet apart.
Where:
- Posts along Length =
- Posts along Width =
- Post Spacing is typically 8 feet
Fasteners (Screws/Nails) Calculation
The number of fasteners needed depends on how many deck boards and joists you have. Typically, you'll need 2 screws per board at each joist intersection.
Where:
- Fasteners per Intersection is typically 2
Concrete Calculation
Concrete is needed for post footings. The amount depends on the number of posts and the size of the footings.
Where:
- Concrete per Post is typically 0.2 cubic feet (for a 10-inch diameter, 10-inch deep footing)
Step-by-Step Guide to Using the Decking Calculator
Follow these simple steps to accurately estimate the materials needed for your deck project:
-
Enter Deck Dimensions:
- Input the length of your deck in feet
- Input the width of your deck in feet
- Input the height of your deck in feet (from ground to deck surface)
-
Review the Material Estimates:
- Deck Boards: The number of boards needed for the deck surface
- Joists: The number of joists needed for the frame
- Beams: The number of beams needed to support the joists
- Posts: The number of posts needed to support the beams
- Screws/Nails: The number of fasteners needed to secure the deck boards
- Concrete: The amount of concrete needed for post footings (in cubic feet)
-
Adjust for Waste Factor (recommended):
- Add 10-15% extra material to account for waste, cuts, and damaged pieces
- For example, if the calculator suggests 50 deck boards, consider purchasing 55-58 boards
-
Consider Additional Materials:
- Remember that the calculator provides estimates for basic structural materials only
- You may also need additional materials like railing components, stair materials, flashing, joist hangers, post anchors, and sealer/stain
-
Copy or Print Your Results:
- Use the copy button to save your material list for reference when purchasing supplies
Use Cases for the Decking Calculator
The Decking Calculator is a versatile tool that can be used in various scenarios:
1. DIY Deck Building
For homeowners tackling a deck project themselves, the calculator provides a clear shopping list of materials needed. This helps with budgeting and ensures you don't run short of materials mid-project, which can cause delays and inconsistencies in your deck.
Example: A homeowner planning a 16' × 12' deck at 3' height would need approximately:
- 48 deck boards
- 10 joists
- 3 beams
- 12 posts
- 960 screws
- 2.4 cubic feet of concrete
2. Professional Contractor Estimates
Contractors can use the calculator to quickly generate material estimates for client proposals. This leads to more accurate quotes and helps prevent cost overruns due to material miscalculations.
Example: A contractor bidding on a large 24' × 20' elevated deck would use the calculator to determine precise material quantities, ensuring their bid is competitive yet profitable.
3. Budget Planning
Before committing to a deck project, homeowners can use the calculator to estimate material costs and adjust the deck size to fit their budget.
Example: A homeowner might discover that reducing their planned deck from 20' × 16' to 16' × 14' could save significantly on materials while still meeting their needs.
4. Renovation Projects
When replacing an existing deck, the calculator helps determine how much new material is needed, even if you're keeping some of the original structure.
Example: If replacing just the deck boards on an existing 12' × 10' deck, the calculator can determine exactly how many new boards are required.
Alternatives to the Decking Calculator
While our Decking Calculator provides comprehensive material estimates based on standard construction practices, there are alternative approaches to calculating deck materials:
1. Square Footage Method
Some builders estimate materials based on the deck's square footage rather than calculating each component separately.
Pros:
- Simpler calculation
- Works well for quick, rough estimates
Cons:
- Less accurate for complex designs
- Doesn't account for specific structural requirements
2. Professional Design Software
Advanced deck design software can provide detailed 3D models and material lists.
Pros:
- Highly accurate for complex designs
- Can account for custom features and unusual shapes
Cons:
- Expensive
- Steep learning curve
- Overkill for simple deck projects
3. Lumber Yard Estimation Services
Many lumber yards and home improvement stores offer free material estimation services when you provide your deck plans.
Pros:
- Professional assistance
- Often free with purchase
- May catch design issues
Cons:
- Requires detailed plans
- May be biased toward selling more materials than needed
- Limited to store business hours
History of Deck Building and Material Estimation
The practice of building outdoor decks as we know them today began to gain popularity in North America during the post-World War II housing boom of the 1950s and 1960s. As suburban living expanded, homeowners sought ways to extend their living space outdoors, leading to the rise of the modern deck.
Early deck construction relied heavily on experienced carpenters' knowledge for material estimation. Builders would create detailed material lists based on their understanding of framing principles and local building practices. These calculations were often done by hand, using basic arithmetic and years of experience.
In the 1970s and 1980s, as pressure-treated lumber became widely available, deck building became more accessible to homeowners. This period saw the publication of the first DIY deck building guides, which included basic material calculation tables and formulas.
The 1990s brought the first computer-based construction calculators, though these were primarily used by professionals. By the early 2000s, online calculators began to appear, making material estimation more accessible to the average homeowner.
Today's deck material calculators, like ours, use sophisticated algorithms based on standard building practices to provide accurate estimates for all components of a deck. Modern calculators can account for various deck shapes, heights, and material types, making deck planning more precise than ever before.
The evolution of deck material estimation reflects broader trends in construction: from reliance on craftsman knowledge to standardized calculations to digital tools that make professional-level planning accessible to everyone.
Code Examples for Calculating Deck Materials
Here are examples in various programming languages showing how to calculate deck materials:
1// JavaScript function to calculate deck materials
2function calculateDeckMaterials(length, width, height) {
3 // Convert dimensions to ensure they're numbers
4 length = parseFloat(length);
5 width = parseFloat(width);
6 height = parseFloat(height);
7
8 // Standard constants
9 const BOARD_WIDTH = 5.5; // inches
10 const JOIST_SPACING = 16; // inches
11 const BEAM_SPACING = 8; // feet
12 const POST_SPACING = 8; // feet
13 const SCREWS_PER_BOARD_PER_JOIST = 2;
14 const CONCRETE_PER_POST = 0.2; // cubic feet
15
16 // Calculate deck boards
17 const widthInInches = width * 12;
18 const boardsAcross = Math.ceil(widthInInches / BOARD_WIDTH);
19 const deckBoards = boardsAcross;
20
21 // Calculate joists
22 const joists = Math.ceil((width * 12) / JOIST_SPACING) + 1;
23
24 // Calculate beams
25 const beams = Math.ceil(length / BEAM_SPACING) + 1;
26
27 // Calculate posts
28 const postsAlongLength = Math.ceil(length / POST_SPACING) + 1;
29 const postsAlongWidth = Math.ceil(width / POST_SPACING) + 1;
30 const posts = postsAlongLength * 2 + (postsAlongWidth - 2) * 2;
31
32 // Calculate screws
33 const screws = deckBoards * joists * SCREWS_PER_BOARD_PER_JOIST;
34
35 // Calculate concrete
36 const concrete = (posts * CONCRETE_PER_POST).toFixed(2);
37
38 return {
39 deckBoards,
40 joists,
41 beams,
42 posts,
43 screws,
44 concrete
45 };
46}
47
48// Example usage
49const materials = calculateDeckMaterials(16, 12, 3);
50console.log(materials);
511# Python function to calculate deck materials
2import math
3
4def calculate_deck_materials(length, width, height):
5 # Standard constants
6 BOARD_WIDTH = 5.5 # inches
7 JOIST_SPACING = 16 # inches
8 BEAM_SPACING = 8 # feet
9 POST_SPACING = 8 # feet
10 SCREWS_PER_BOARD_PER_JOIST = 2
11 CONCRETE_PER_POST = 0.2 # cubic feet
12
13 # Calculate deck boards
14 width_in_inches = width * 12
15 boards_across = math.ceil(width_in_inches / BOARD_WIDTH)
16 deck_boards = boards_across
17
18 # Calculate joists
19 joists = math.ceil((width * 12) / JOIST_SPACING) + 1
20
21 # Calculate beams
22 beams = math.ceil(length / BEAM_SPACING) + 1
23
24 # Calculate posts
25 posts_along_length = math.ceil(length / POST_SPACING) + 1
26 posts_along_width = math.ceil(width / POST_SPACING) + 1
27 posts = posts_along_length * 2 + (posts_along_width - 2) * 2
28
29 # Calculate screws
30 screws = deck_boards * joists * SCREWS_PER_BOARD_PER_JOIST
31
32 # Calculate concrete
33 concrete = round(posts * CONCRETE_PER_POST, 2)
34
35 return {
36 "deck_boards": deck_boards,
37 "joists": joists,
38 "beams": beams,
39 "posts": posts,
40 "screws": screws,
41 "concrete": concrete
42 }
43
44# Example usage
45materials = calculate_deck_materials(16, 12, 3);
46print(materials);
471public class DeckCalculator {
2 // Standard constants
3 private static final double BOARD_WIDTH = 5.5; // inches
4 private static final double JOIST_SPACING = 16.0; // inches
5 private static final double BEAM_SPACING = 8.0; // feet
6 private static final double POST_SPACING = 8.0; // feet
7 private static final int SCREWS_PER_BOARD_PER_JOIST = 2;
8 private static final double CONCRETE_PER_POST = 0.2; // cubic feet
9
10 public static class DeckMaterials {
11 public int deckBoards;
12 public int joists;
13 public int beams;
14 public int posts;
15 public int screws;
16 public double concrete;
17
18 @Override
19 public String toString() {
20 return "DeckMaterials{" +
21 "deckBoards=" + deckBoards +
22 ", joists=" + joists +
23 ", beams=" + beams +
24 ", posts=" + posts +
25 ", screws=" + screws +
26 ", concrete=" + concrete +
27 '}';
28 }
29 }
30
31 public static DeckMaterials calculateMaterials(double length, double width, double height) {
32 DeckMaterials materials = new DeckMaterials();
33
34 // Calculate deck boards
35 double widthInInches = width * 12;
36 int boardsAcross = (int) Math.ceil(widthInInches / BOARD_WIDTH);
37 materials.deckBoards = boardsAcross;
38
39 // Calculate joists
40 materials.joists = (int) Math.ceil((width * 12) / JOIST_SPACING) + 1;
41
42 // Calculate beams
43 materials.beams = (int) Math.ceil(length / BEAM_SPACING) + 1;
44
45 // Calculate posts
46 int postsAlongLength = (int) Math.ceil(length / POST_SPACING) + 1;
47 int postsAlongWidth = (int) Math.ceil(width / POST_SPACING) + 1;
48 materials.posts = postsAlongLength * 2 + (postsAlongWidth - 2) * 2;
49
50 // Calculate screws
51 materials.screws = materials.deckBoards * materials.joists * SCREWS_PER_BOARD_PER_JOIST;
52
53 // Calculate concrete
54 materials.concrete = Math.round(materials.posts * CONCRETE_PER_POST * 100) / 100.0;
55
56 return materials;
57 }
58
59 public static void main(String[] args) {
60 DeckMaterials materials = calculateMaterials(16, 12, 3);
61 System.out.println(materials);
62 }
63}
641' Excel VBA Function for Deck Material Calculation
2Function CalculateDeckBoards(length As Double, width As Double) As Integer
3 Dim boardWidth As Double
4 Dim widthInInches As Double
5 Dim boardsAcross As Integer
6
7 boardWidth = 5.5 ' inches
8 widthInInches = width * 12
9 boardsAcross = Application.WorksheetFunction.Ceiling(widthInInches / boardWidth, 1)
10
11 CalculateDeckBoards = boardsAcross
12End Function
13
14Function CalculateJoists(width As Double) As Integer
15 Dim joistSpacing As Double
16
17 joistSpacing = 16 ' inches
18 CalculateJoists = Application.WorksheetFunction.Ceiling((width * 12) / joistSpacing, 1) + 1
19End Function
20
21Function CalculateBeams(length As Double) As Integer
22 Dim beamSpacing As Double
23
24 beamSpacing = 8 ' feet
25 CalculateBeams = Application.WorksheetFunction.Ceiling(length / beamSpacing, 1) + 1
26End Function
27
28Function CalculatePosts(length As Double, width As Double) As Integer
29 Dim postSpacing As Double
30 Dim postsAlongLength As Integer
31 Dim postsAlongWidth As Integer
32
33 postSpacing = 8 ' feet
34 postsAlongLength = Application.WorksheetFunction.Ceiling(length / postSpacing, 1) + 1
35 postsAlongWidth = Application.WorksheetFunction.Ceiling(width / postSpacing, 1) + 1
36
37 CalculatePosts = postsAlongLength * 2 + (postsAlongWidth - 2) * 2
38End Function
39
40' Usage in Excel:
41' =CalculateDeckBoards(16, 12)
42' =CalculateJoists(12)
43' =CalculateBeams(16)
44' =CalculatePosts(16, 12)
451<?php
2// PHP function to calculate deck materials
3function calculateDeckMaterials($length, $width, $height) {
4 // Standard constants
5 $BOARD_WIDTH = 5.5; // inches
6 $JOIST_SPACING = 16; // inches
7 $BEAM_SPACING = 8; // feet
8 $POST_SPACING = 8; // feet
9 $SCREWS_PER_BOARD_PER_JOIST = 2;
10 $CONCRETE_PER_POST = 0.2; // cubic feet
11
12 // Calculate deck boards
13 $widthInInches = $width * 12;
14 $boardsAcross = ceil($widthInInches / $BOARD_WIDTH);
15 $deckBoards = $boardsAcross;
16
17 // Calculate joists
18 $joists = ceil(($width * 12) / $JOIST_SPACING) + 1;
19
20 // Calculate beams
21 $beams = ceil($length / $BEAM_SPACING) + 1;
22
23 // Calculate posts
24 $postsAlongLength = ceil($length / $POST_SPACING) + 1;
25 $postsAlongWidth = ceil($width / $POST_SPACING) + 1;
26 $posts = $postsAlongLength * 2 + ($postsAlongWidth - 2) * 2;
27
28 // Calculate screws
29 $screws = $deckBoards * $joists * $SCREWS_PER_BOARD_PER_JOIST;
30
31 // Calculate concrete
32 $concrete = round($posts * $CONCRETE_PER_POST, 2);
33
34 return [
35 'deckBoards' => $deckBoards,
36 'joists' => $joists,
37 'beams' => $beams,
38 'posts' => $posts,
39 'screws' => $screws,
40 'concrete' => $concrete
41 ];
42}
43
44// Example usage
45$materials = calculateDeckMaterials(16, 12, 3);
46print_r($materials);
47?>
48Frequently Asked Questions
How accurate is the Decking Calculator?
The Decking Calculator provides estimates based on industry-standard spacing and dimensions. For most rectangular decks, the estimates will be accurate within 10-15%. However, complex designs, unusual shapes, or non-standard spacing may require adjustments to the calculated quantities.
Does the calculator account for waste?
No, the calculator provides the theoretical minimum amount of materials needed. We recommend adding 10-15% extra material to account for waste, damaged pieces, and cutting errors.
What board width does the calculator assume?
The calculator assumes standard 5.5-inch wide deck boards (the actual width of a nominal 6-inch board). If you're using different width boards, you'll need to adjust the deck board estimate accordingly.
Does the calculator include materials for railings and stairs?
No, the calculator focuses on the basic structural components of the deck (boards, joists, beams, posts, fasteners, and concrete). Railings and stairs require additional materials that vary based on design and local building codes.
What joist spacing does the calculator use?
The calculator assumes 16-inch on-center joist spacing, which is standard for residential decks. If your design calls for different spacing (like 12 inches or 24 inches), you'll need to adjust the joist count accordingly.
How do I calculate materials for a non-rectangular deck?
For non-rectangular decks, break the design into rectangular sections, calculate materials for each section separately, and then combine the results. For curved sections, calculate as if they were rectangular and then adjust based on the specific design.
Does the calculator account for different types of decking materials?
The calculator works for standard lumber dimensions. If you're using composite decking, the board count will be similar, but fastener requirements may differ. Always check the manufacturer's recommendations for specific materials.
What height deck requires a permit?
Permit requirements vary by location, but generally, decks more than 30 inches above grade require a permit. Some jurisdictions require permits for all decks regardless of height. Always check with your local building department before starting construction.
How much does it cost to build a deck?
The cost varies widely based on size, materials, and location. As of 2023, a pressure-treated wood deck typically costs £15-25 per square foot, while composite decking can range from £30-60 per square foot. Using our calculator to determine exact material quantities can help you create a more accurate budget.
How deep should deck footings be?
Footing depth depends on local building codes and frost lines in your area. In cold climates, footings must extend below the frost line, which can be 48 inches or deeper. In warmer climates, 12-24 inch footings may be sufficient. Always check local building codes for specific requirements.
References
- American Wood Council. (2023). "Prescriptive Residential Wood Deck Construction Guide." https://awc.org/codes-standards/publications/dca6/
- International Code Council. (2021). "International Residential Code (IRC)." https://codes.iccsafe.org/
- Simpson Strong-Tie. (2023). "Deck Connection and Fastening Guide." https://www.strongtie.com/resources/literature/deck-connection-fastening-guide
- Forest Products Laboratory. (2021). "Wood Handbook: Wood as an Engineering Material." https://www.fpl.fs.fed.us/documnts/fplgtr/fpl_gtr190.pdf
- Decks.com. (2023). "Deck Material Calculator." https://www.decks.com/calculators
- National Association of Home Builders. (2022). "Cost of Constructing a Home." https://www.nahb.org/
Conclusion
The Decking Calculator is an essential tool for anyone planning to build a deck. By providing accurate material estimates based on your deck's dimensions, it helps you budget effectively, purchase the right amount of materials, and avoid costly delays during construction. Remember that while the calculator offers a solid starting point, factors like complex designs, local building codes, and specific material choices may require adjustments to these estimates.
Before beginning your deck project, always consult local building codes and consider having your plans reviewed by a professional, especially for elevated decks or complex designs. With proper planning and the right materials, your new deck will provide years of enjoyment and add value to your home.
Ready to start planning your deck? Enter your dimensions in the calculator above to get a comprehensive list of materials needed for your project.
Пов'язані Інструменти
Відкрийте більше інструментів, які можуть бути корисними для вашого робочого процесу